Rees Factory in Oberstdorf

Your manufacturer for
accessories around metal roofs.
We keep what we promise!

Welcome to REES snow retention systems

We are your manufacturer and partner for construction parts and accessories for various types of metal roofs.


Originating from the tinsmith's shop Rees in Oberstdorf, we have been dealing with the execution of metal roofs for decades. The location of our handicraft business in the Allgäu Alps and the associated activity in one of the snowiest areas of Germany and the Austrian Kleinwalsertal, always brings forth new experiences, which we constantly incorporate into the development of our products.

With our comprehensive know-how, we offer excellent solutions that function reliably and guarantee high product and service quality for years to come.

On this homepage you will find information about:
- Snow retention systems, steps and walking gratings, solar holders and our clip product range.
- Product descriptions, mounting instructions, tendering texts.
- In our online catalogue you will find our complete product range.

Rees Icon Book
  • Mannheimer Hütte - snow retention system
  • REES special designs
  • ATLAS solar clamp approved by building authorities
  • Office closed at 09.06.2023

Mannheimer Hütte - snow retention system

You can also find our snow retention in very special places. The roof of the Mannheimer Hütte was renovated last year on one of the highest construction sites in Austria. This special construction project was reported on in the Spengler trade journal. The corresponding report can be found here.

You can find the corresponding report here.

REES custom-made products

Do you have individual ideas about our products?

We are also happy to produce custom-made products for you in the area of ​​snow retention, step and walking gratings, solar holder or in the clip product range within the scope of our possibilities. Examples of our custom-made products are reinforced triple or quadruple snow retention systems.

Let us advise you about our possibilities.

You can find more information here.

ATLAS solar clamp - building-authority approved

Rees product close-up

In cooperation with the companies ATLAS Hallen and MONTECO, our solar clamp was approved by the building authorities for the EuroRib Roofingsystem.

Thus, a penetration-free installation of PV elements is also possible on EuroRib roofs.

You can find more information about the solar clamp here.

Office closed at 09.06.2023

 

Due to the holiday corpus christi on Thursday, 08.06.2023, we will also be closing our office on Friday, 09.06.2023.

You can reach us again on Monday, 12.06.2023 from 7.30 a.m.

 

Clamp holder for steps and walking gratings V2A

Clamp holder for steps and walking gratings will be mounted on double standing seams of metal-roofs. Suitable for roof pitches up to 40 degrees. To meet the EN – 516 requirements (European standards) you have to make sure, that the distance between each holder is not bigger than 80 cm, resp. 31.5 inches. The clip distance on the sub-construction of the roof, has to comply with the technical rules for the German plumbing trade. The clamp holders have to be mounted on the at least 25mm resp. 0.98 inches high double-standing-seam and only at the areas of the fixing or sliding clips. Older roofs have to be audited before mounting, to check if the double-standing-seams are damaged or if the sub-construction is broken resp. spoiled somehow. It is necessary, that the seams are absolutely intact! Designation according to the expert regulations of the german-plumping-craftsmanship

Art.-No. LA-1652
Type of product Steps and gratings
Material Stainless steel A2
Roof covering
  • Kliptec
  • Snap lock
  • Standing seam
  • Standing seam other
Weight per piece 1,75
VPE 10

Fixing clip V2A

Fixing clip suitable for angle and double standing seam. Attaching on the pre-profiled standing seam. With rounded corners and a fine splay at the foot end. Our clips are manufactured according to the technical rules for the German plumbing trade regarding material, strength and design. The special shaping of the upper part of our fixing clips results in a slight clamping effect in the pre-profiled seam, which contributes to the fact that the suspended attachments do not slide downwards.

Art.-No. HA-5350-50
Type of product Clips
Material Stainless steel A2
Roof covering
  • Fixing with nails
  • Standing seam
Weight per piece 0,010
VPE 400

Snap-lock clip V2A

with rounded edges and a fine splay at the foot end. Size, meassurements and material thickness are according to the technical rules of the German plumping trade.

Art.-No.
Type of product Clips
Material Stainless steel A2
Roof covering
  • Fixing with nails
  • Snap lock

Throat flap (slanted flap)

Snow retention flaps for mounting on standing seam roofs up to 33 mm outer diameter with sloping roof panels for single tube design. With stainless steel screws A2 M12 x 30 and nuts A4 M12.

Art.-No. LA-1127
Type of product Snow retention
Material Aluminium
Roof covering
  • Kliptec
  • Snap lock
  • Standing seam
  • Standing seam other
Weight per piece Alu: 0,330 - Kupfer: 0,750
PE Pcs = 2 lug parts, 2 screws and 2 nuts

REES is certified according to ISO 9001:2015

Quality is a top priority at REES. In addition to the specifications of DIN EN ISO 9001:2015, we rely on our factory production control.

We always strive for consistently high quality in the manufacture and development of our products. TÜV Süd and its competent team are there to help us with the certification of our quality management and the monitoring of production.

You can find more information here.